Pro Tools

直接把安装用Google的翻译放这儿（看了下翻译没什么大问题，反正自己可以看nfo的）：
[看着有狗，还有虚拟乐器觉得舒服]
这是今天在老地方出现的
Avid Pro Tools HD v10.3.2+Virtual Instruments 10+ILOK drivers x64+Patch (beta 10) mukundas版本

系统要求（Windows）：

- 计算机：符合Avid要求的基于Windows的计算机或笔记本电脑
- 操作系统：Windows 7 SP1（32位或64位）
- 处理器：英特尔Core 2 Duo 2.33 GHz处理器或更快
- 内存：4 GB的RAM（建议使用8 GB）
- 最少15 GB可用硬盘空间用于安装


******************
安装注意事项：
******************

1  - 安装（以管理员身份）的Avid Pro Tools的v10.3.2 Win7的安装77970.zip内容

2  - 安装Avid的虚拟仪器（如管理员）10 Win7的安装73466.zip内容（如果需要的话。虚拟仪器与MIDI）

3  - 应用的Avid Pro Tools的10.3.2补丁（beta10）mukundas.exe（如管理员，当然）

4  - 享受:)

注：在Windows 7 64位系统，如果你正在尝试一个“错误”，“缺少的iLok授权的Pro Tools 10。请插入必要的伊洛克和重新启动的Pro Tools”确定的iLok驱动程序实际安装，矿山不会安装在我的旧的iLok驱动程序解决了这个问题，这样做的：

a）从Windows的“添加或删除程序”功能，卸载任何上市的“授权支持”和“INTERLOK驱动程序设置”

B）重新启动系统

c）断开连接到系统的任何iLoks

D）运行和安装Tpkdx64Setup.exe的文件中找到驱动程序文件夹中的“PACE的iLok驱动程序installx64.zip”文件（激流）或在installx64.zip的文件链接>> http://www.paceap.com/ extensions/installers/x64/installx64.zip
这是非常重要的是，没有防病毒（特别是卡巴斯基）运行。

E）重新启动计算机

F）安装LicenseSupportSetup64.exe的文件中发现的上述的installx64.zip文件链接的组件文件夹。再次，要确保没有防病毒软件或互联Wang-监控软件运行。

G）重新启动计算机

对于Windows 8的（我没有尝试过这一点，但其他人已经成功地使用此解决方案）：

如果您收到错误-9514，去解压缩后的Pro Tools的安装文件夹，然后Pro Tools安装ISSetupPrerequisites安装Avid的核心运行时，Avid高清的驱动程序64位和DigiDriver的64位的。然后以管理员身份运行Pro Tools。

希望这会有所帮助！

的iLok麻烦的解决方案，这要感谢“pipco”在Audionews.org下一个链接：
http://forum.audionews.org/viewtopic.php?p=809464＃809464

盒装和上传的坎波桑托

nfo安装原文如下：
System Requirements (Windows):
- Computer: Avid-qualified Windows-based computer or laptop
- OS: Windows 7 SP1 (32 or 64-bit)
- Processor: Intel Core 2 Duo 2.33 GHz processor or faster
- RAM: 4 GB of RAM (8 GB recommended)
- Minimum 15 GB free hard disk space for installation
******************
* INSTALL NOTES: *
******************
1.- Install (as Administrator) Avid Pro Tools v10.3.2 Win7 Installer 77970.zip content
2.- Install (as Administrator) Avid Virtual Instruments 10 Win7 Installer 73466.zip content (if needed. Virtual Instruments for working with MIDI)
3.- Apply Avid Pro Tools 10.3.2 Patch (beta10) mukundas.exe (as Administrator, of course)
4.- Enjoy :)
Note: In Windows 7 x64, if you're experimenting an "Error, missing ilok authorization for pro Tools 10. please insert the necessary ilok and restart Pro Tools" make sure iLok drivers actually install, mine would not install over my old iLok drivers, solved it by doing this:
a) From Windows' Add or Remove Programs feature, uninstall any listing of "License Support" and "Interlok driver setup"
b) Reboot the system
c) Disconnect any iLoks connected to the system
d) Run and install Tpkdx64Setup.exe file found in the Drivers folder of the "PACE ILOK drivers installx64.zip" file (included in torrent) or the installx64.zip file linked here >> http://www.paceap.com/extensions/installers/x64/installx64.zip
It is very important that no anti-virus (especially Kaspersky) is running.
e) Restart the computer
f) Install LicenseSupportSetup64.exe file found in the Components folder of the installx64.zip file linked above. Again, make sure no anti-virus or internet monitoring software is running.
g) Restart the computer
For Windows 8 (I have not tried this but others have had success with this solution):
If you get error -9514, go to the unzipped Pro Tools installation folder, then Pro Tools Installer>ISSetupPrerequisites and install Avid Core Runtime, Avid HD Driver x64 and DigiDriver x64. Then run Pro Tools as administrator.
hope this helps !!
iLok trouble's solution thanks to "pipco" in Audionews.org next link:
http://forum.audionews.org/viewtopic.php?p=809464#809464
Packed and uploaded by camposanto

[ 本帖最后由 mryc 于 12-11-13 17:17 编辑 ]