Sawstudio

请问MS的VST解码插件的使用 是如何分解和还原的？
Encoder Secoder怎么解释
该如何操作呢 最后到底是怎么还原的？挂到哪？

几天了没反映  什么个情况啊？？？？？？？？？没人用过么

不太會用...

不過如果想用 ms 效果, 以下介紹的彈性較高

http://www.audiobar.net/viewthread.php?tid=250170&highlight=ms

老大 ni

老大你都说不太会用  那俺们不得哭死啊
SAW那个我学啦。。。
可用这个VST可以解决大多数录音软件使用MS方式处理
求解啊！！！！！

會用 sonoris 的那個 ms code 應該也會用 voxengo 這個..........

有請各位大俠......

Encoding:
L out = M = L + R -> center information
R out = S = L -R -> side information

Decoding:
L out = M + R
R out = M - S

Mode：
LR -> LR: encodes and decodes a stereo signal to/from MS and allows adjusting the MS gain in between. Use this mode to adjust the stereo image.

LR -> MS: encodes a stereo signal to MS and allows adjusting the MS gain. Use this mode when you want to process the M and/or S channels individually with for example different eq settings.

MS -> LR: decodes a MS signal to stereo and allows adjusting the left/right gain. Use this this mode to convert back to stereo after processing the former mode. You can also use this mode when you want to decode a MS microphone signal.


把这几段看明白基本就明白了。

[ 本帖最后由 yangt 于 09-5-21 10:52 编辑 ]

TRacKS 3里也有这东西，而且暗藏玄机。

LZ 是想用 VOXENGO 的插件來做到 MS 效果

......

MS制式就是把歌曲两边和中间分开处理，从而达到更好的效果

还是老大明白我的心

Mode： LR -> LR: encodes and decodes a stereo signal to/from MS and allows adjusting the MS gain in between. Use this mode to adjust the stereo image. LR -> MS: encodes a stereo signal to MS and allows adjusting the MS gain. Use this mode when you want to process the M and/or S channels individually with for example different eq settings. MS -> LR: decodes a MS signal to stereo and allows adjusting the left/right gain. Use this this mode to convert back to stereo after processing the former mode. You can also use this mode when you want to decode a MS microphone signal.
哥们你给翻译下啊

看是看得明白, 就是不知它怎用....

不用想那么复杂的，其实那就两个含义：


Encoder ：编码模式，将普通制式立体声转换为MS制式的立体声；


Decoder：解码模式，将MS制式立体声转换为普通制式立体声。

做母带、搞混音一直都是云里雾里，别人说怎么做就跟着学学样子，深层次的东西，不懂。