- 第 1 页 -
综合效果器Meldaproduction MTotalBundle VST VST3 5.00 x86 x64
MeldaProduction.MTotalBundle.VST.VST3.v5.00.x86.x64-ASSiGN\
MeldaProduction MTotalBundle is the ultimate bundle of effects, that will convert your computer into a top-class professional sound studio. It contains all of our effects covering all required tasks, composing, mixing and mastering. Free for life updates pay here too, so once you you purchase it, any effect we release will be free for you! And it takes just a few clicks using our update system... The bundle contains traditional plug-ins as well as our revolutionary technologies, which give you the power to make your recordings sound incredible even if you didn't spend last 50 years as an audio engineer. High speed, simplicity, crystal clear sound and minimal noise level is standard in MeldaProduction.
MTotalBundle 5.00 changes
Dual user interfaces - most commercial plugins now contain 2 interfaces, a simple default one with several predefined modes, but just a few controls, and an advanced one. This makes the plugins not only extremely versatile, but also quick and easy-to-use.
Unique new analysis engine for MAnalyzer and all equalizers - new analysis engine is faster, more accurate and provides a whole new range of unique features, such as micro-sonograms, full sonograms, super-resolution (providing high resolution for low frequencies keeping speed for the high frequencies), prefilters (for loudness curves) or deharmonization (for easier fundamental frequencies analysis).
Plugins are now categorized under VST and VST3 - with more than 55 plugins it started to be hard to find the plugin you need, therefore they are now categorized by purpose to Dynamics, EQs etc. With VST3 they also fit the standardized structure in your host (if it supports it).
Added next/previous preset buttons.
Added A/B switch to swap between previous two A-H presets.
Added reset and collapsible band editor for equalizers.
Added visual areas for equalizers.
Added autolisten feature to parametric equalizers.
MAutoEqualizer GUI completely restructuralised for easier workflow.
Huge audio quality improvements for MMultiBandHarmonizer.
Added 0% & 100% modes for global dry/wet for all multiband plugins.
Increased accuracy when dragging Q in equalizers.
Added "use first parameter's range" mode for modulators and multiparameters.
Added a few shortcuts to control zooming in graph editors.
Added global surround switch useful to make the plugins more compatible with some hosts.
Added resizing arrow for resizable windows.
Added smooth 2 envelope point mode.
Upsampling range extended to 16x.
Multiband peakmeters can now show different channels in surround.
Optimized preset and settings storage.
Preset exchange is now enabled by default, can be disabled in Settings.
Added channel link slider from 0% to 100% for MDynamics and MMultiBandDynamics.
Band enable buttons have been removed for equalizers, instead the icon is clickable.
MDynamics now shows true-RMS with integration time 0.4s.
Added expander modes to MDynamics and MSpectralDynamics. Range behaviour has been slightly modified.
Added multiparameters to MMultiBandLimiter & MDynamicsLimiter.
Slope can now be automated in MMultiBandLimiter and MUltraMaximizer.
Multiband gain reduction meters in MMultiBandDynamics and MMultiBandLimiter now show true gain reduction.
Added single-pole (6dB/oct) lowpass & highpass filters for equalizers.
Optimized changing of parameters when "simulate realistic shapes" is enabled in vibratos.
Added support for AIFF files in MMultiBandConvolution.
Added Truestereo LRRL and RLLR modes for MMultiBandConvolution.
Added IR stretching for MMultiBandConvolution.
Added dry/wet for MMultiBandDistortion.
MDynamicsLimiter now shows only single peakmeter for mono tracks.
Improved MAutoAlign support for Logic
MSpectralDynamics now resizes both the parameters on the left and the spectral editor on the right.
Added manual phase invert for MAutoAlign.
MFreqShifter and MMultiBandFreqShiter algorithms modified to prevent clicking when changing frequency shift from positive to negative.
MMultiBandVibrato, MMultiBandHarmonizer and MVibrato now keep settings across sampling rates.
Fix: Resizing windows with splitters changed ratio of the splitters.
Fix: Resizable windows were sometimes showing arrow cursor over a position, where the window couldn't be resized.
Fix: Demoversions with sidechain were crashing occasionally.
Fix: Plugins with sidechain were occasionally crashing on Mac AU.
Fix: A Windows message was poping when trying to access an unavailable drive.
Fix: Upsampling latency wasn't reported correctly.
Fix: Improved automation support with Ableton Live.
Fix: Plugins didn't store bypass state.
Fix: Multiparameters in switch mode were showing inverted state.
Fix: Alt+Click in a graph editor caused maximum zoom, which is now disabled.
Fix: Units in zoomed mode were sometimes showing invalid grid lines.
Fix: Temp gain wasn't updated when automated/modulated.
Fix: MDynamics and MMultiBandDynamics automatic release mode didn't work well under certain circumstances.
Fix: MMultiBandLimiter didn't store saturation enabled state properly.
Fix: MMultiBandDynamics was showing only single band's gain reduction.
Meldaproduction MTotalBundle VST VST3 5.00 x86 x64 | 279 MB
同时还发布
MeldaProduction.MDrummer.Large.4.STANDALONE.VSTi.VST3.v4.00.x86.x64.FIX.ONLY-ASSiGN
NOTE ABOUT THE PROBLEM: Actually, previous release is working; We don't need to releaes this fix But seeing many warez forums, many people seems to have the problem with our previous release. So I decided to release this again. After the installation, you need to run the "MDrummer Configuration", or you can only run the standalone version. VST2 and VST3 of MDrummer need those configuration to run. PLEASE READ MANUAL(S) FiX NOTE: To release this (non) fix version, our cracker completely reworked for the the MDrummer. This crack is smarter than previous one.
Meldaproduction Mdrummer Large 4 Standalone VSTi VST3 4.00 x86 x64 Fix Only | 33 MB
[ 本帖最后由 huangheren 于 11-5-22 12:57 编辑 ]
MeldaProduction MTotalBundle is the ultimate bundle of effects, that will convert your computer into a top-class professional sound studio. It contains all of our effects covering all required tasks, composing, mixing and mastering. Free for life updates pay here too, so once you you purchase it, any effect we release will be free for you! And it takes just a few clicks using our update system... The bundle contains traditional plug-ins as well as our revolutionary technologies, which give you the power to make your recordings sound incredible even if you didn't spend last 50 years as an audio engineer. High speed, simplicity, crystal clear sound and minimal noise level is standard in MeldaProduction.
MTotalBundle 5.00 changes
Dual user interfaces - most commercial plugins now contain 2 interfaces, a simple default one with several predefined modes, but just a few controls, and an advanced one. This makes the plugins not only extremely versatile, but also quick and easy-to-use.
Unique new analysis engine for MAnalyzer and all equalizers - new analysis engine is faster, more accurate and provides a whole new range of unique features, such as micro-sonograms, full sonograms, super-resolution (providing high resolution for low frequencies keeping speed for the high frequencies), prefilters (for loudness curves) or deharmonization (for easier fundamental frequencies analysis).
Plugins are now categorized under VST and VST3 - with more than 55 plugins it started to be hard to find the plugin you need, therefore they are now categorized by purpose to Dynamics, EQs etc. With VST3 they also fit the standardized structure in your host (if it supports it).
Added next/previous preset buttons.
Added A/B switch to swap between previous two A-H presets.
Added reset and collapsible band editor for equalizers.
Added visual areas for equalizers.
Added autolisten feature to parametric equalizers.
MAutoEqualizer GUI completely restructuralised for easier workflow.
Huge audio quality improvements for MMultiBandHarmonizer.
Added 0% & 100% modes for global dry/wet for all multiband plugins.
Increased accuracy when dragging Q in equalizers.
Added "use first parameter's range" mode for modulators and multiparameters.
Added a few shortcuts to control zooming in graph editors.
Added global surround switch useful to make the plugins more compatible with some hosts.
Added resizing arrow for resizable windows.
Added smooth 2 envelope point mode.
Upsampling range extended to 16x.
Multiband peakmeters can now show different channels in surround.
Optimized preset and settings storage.
Preset exchange is now enabled by default, can be disabled in Settings.
Added channel link slider from 0% to 100% for MDynamics and MMultiBandDynamics.
Band enable buttons have been removed for equalizers, instead the icon is clickable.
MDynamics now shows true-RMS with integration time 0.4s.
Added expander modes to MDynamics and MSpectralDynamics. Range behaviour has been slightly modified.
Added multiparameters to MMultiBandLimiter & MDynamicsLimiter.
Slope can now be automated in MMultiBandLimiter and MUltraMaximizer.
Multiband gain reduction meters in MMultiBandDynamics and MMultiBandLimiter now show true gain reduction.
Added single-pole (6dB/oct) lowpass & highpass filters for equalizers.
Optimized changing of parameters when "simulate realistic shapes" is enabled in vibratos.
Added support for AIFF files in MMultiBandConvolution.
Added Truestereo LRRL and RLLR modes for MMultiBandConvolution.
Added IR stretching for MMultiBandConvolution.
Added dry/wet for MMultiBandDistortion.
MDynamicsLimiter now shows only single peakmeter for mono tracks.
Improved MAutoAlign support for Logic
MSpectralDynamics now resizes both the parameters on the left and the spectral editor on the right.
Added manual phase invert for MAutoAlign.
MFreqShifter and MMultiBandFreqShiter algorithms modified to prevent clicking when changing frequency shift from positive to negative.
MMultiBandVibrato, MMultiBandHarmonizer and MVibrato now keep settings across sampling rates.
Fix: Resizing windows with splitters changed ratio of the splitters.
Fix: Resizable windows were sometimes showing arrow cursor over a position, where the window couldn't be resized.
Fix: Demoversions with sidechain were crashing occasionally.
Fix: Plugins with sidechain were occasionally crashing on Mac AU.
Fix: A Windows message was poping when trying to access an unavailable drive.
Fix: Upsampling latency wasn't reported correctly.
Fix: Improved automation support with Ableton Live.
Fix: Plugins didn't store bypass state.
Fix: Multiparameters in switch mode were showing inverted state.
Fix: Alt+Click in a graph editor caused maximum zoom, which is now disabled.
Fix: Units in zoomed mode were sometimes showing invalid grid lines.
Fix: Temp gain wasn't updated when automated/modulated.
Fix: MDynamics and MMultiBandDynamics automatic release mode didn't work well under certain circumstances.
Fix: MMultiBandLimiter didn't store saturation enabled state properly.
Fix: MMultiBandDynamics was showing only single band's gain reduction.
Meldaproduction MTotalBundle VST VST3 5.00 x86 x64 | 279 MB
同时还发布
MeldaProduction.MDrummer.Large.4.STANDALONE.VSTi.VST3.v4.00.x86.x64.FIX.ONLY-ASSiGN
NOTE ABOUT THE PROBLEM: Actually, previous release is working; We don't need to releaes this fix But seeing many warez forums, many people seems to have the problem with our previous release. So I decided to release this again. After the installation, you need to run the "MDrummer Configuration", or you can only run the standalone version. VST2 and VST3 of MDrummer need those configuration to run. PLEASE READ MANUAL(S) FiX NOTE: To release this (non) fix version, our cracker completely reworked for the the MDrummer. This crack is smarter than previous one.
Meldaproduction Mdrummer Large 4 Standalone VSTi VST3 4.00 x86 x64 Fix Only | 33 MB
[ 本帖最后由 huangheren 于 11-5-22 12:57 编辑 ]
暫借此帖
2011.05.26 阿婶 版
NuGen.Audio.All.Plugins.Bundle.VST.RTAS.v05.2011.x86.x64 (39 MB)
Includes:
Visualizer v1.9.6 [VST2(x86)]
SEQ1 Master Edition v1.2.6 [VST2(x86)]
SEQ2 Master Edition v1.2.6 [VST2(x86)]
Monofilter v4.0.8 [VST2(x86/x64), VST3(x86/x64), RTAS]
Stereoizer v3.1.11 [VST2(x86/x64), VST3(x86/x64), RTAS]
Stereoplacer v3.0.5 [VST2(x86/x64), VST3(x86/x64), RTAS]
Line-Up v2.2.4 [VST2(x86)]
* 沒什麼重大更新 AiR 四月版就有 *
2011.05.26 阿婶 版
NuGen.Audio.All.Plugins.Bundle.VST.RTAS.v05.2011.x86.x64 (39 MB)
Includes:
Visualizer v1.9.6 [VST2(x86)]
SEQ1 Master Edition v1.2.6 [VST2(x86)]
SEQ2 Master Edition v1.2.6 [VST2(x86)]
Monofilter v4.0.8 [VST2(x86/x64), VST3(x86/x64), RTAS]
Stereoizer v3.1.11 [VST2(x86/x64), VST3(x86/x64), RTAS]
Stereoplacer v3.0.5 [VST2(x86/x64), VST3(x86/x64), RTAS]
Line-Up v2.2.4 [VST2(x86)]
* 沒什麼重大更新 AiR 四月版就有 *
2011.07.13 PC 阿婶 版
MeldaProduction.MTotalBundle.VST.VST3.v5.02.x86.x64 (252 MB)
求址者 . 请自已搜寻2楼学术性网站
http://audiobar.net/viewthread.php?tid=331455
MeldaProduction.MTotalBundle.VST.VST3.v5.02.x86.x64 (252 MB)
求址者 . 请自已搜寻2楼学术性网站
http://audiobar.net/viewthread.php?tid=331455
2011.11.09 PC 阿婶版
DATE : 10 NOVEMBER 2011
PLATFORM : WiNDOWS
PC x86.x64 阿婶版
MeldaProduction.MTotalBundle.VST.VST3.v5.05.x86.x64 (244 MB)
同一时间阿婶尚释出
Straightarrow.Quiver.VSTi.v1.0.1 (8.5 MB)
Audio.Damage.RatSchack.Reverb.VST.v2.0 (4.3 MB)
Audio.Damage.RatSchack.Reverb.AU.VST.v2.0.1.MAC.OSX (4.7 MB)
Expert.Sleepers.Silent.Way.VST.VSTi.v1.6.14 (15 MB)
AudioFront.DSP.Trigger.VST.v1.3.0.9.x86.x64 (5.5 MB)
QuikQuak.Everything.Bundle.VST.VSTi.v11.2011.x86.x64 (30 MB)
请自行搜索2樓学术性网站
http://audiobar.net/viewthread.php?tid=331455
[ 本帖最后由 狗公腰 于 11-11-9 18:58 编辑 ]
DATE : 10 NOVEMBER 2011
PLATFORM : WiNDOWS
PC x86.x64 阿婶版
MeldaProduction.MTotalBundle.VST.VST3.v5.05.x86.x64 (244 MB)
同一时间阿婶尚释出
Straightarrow.Quiver.VSTi.v1.0.1 (8.5 MB)
Audio.Damage.RatSchack.Reverb.VST.v2.0 (4.3 MB)
Audio.Damage.RatSchack.Reverb.AU.VST.v2.0.1.MAC.OSX (4.7 MB)
Expert.Sleepers.Silent.Way.VST.VSTi.v1.6.14 (15 MB)
AudioFront.DSP.Trigger.VST.v1.3.0.9.x86.x64 (5.5 MB)
QuikQuak.Everything.Bundle.VST.VSTi.v11.2011.x86.x64 (30 MB)
请自行搜索2樓学术性网站
http://audiobar.net/viewthread.php?tid=331455
[ 本帖最后由 狗公腰 于 11-11-9 18:58 编辑 ]