vescoFX Cross Delay VST 1.0
vescoFX Cross Delay VST 1.0 | 4.5 MB
Cross Delay allows you to create advanced stereo delay images in your mixes all in a single plugin. Say goodbye to configuring multiple plugins in parallel with complex routing schemes. The controls to allow echo output to be directed between channels is at the unique heart of this VST plugin. Each echo can be sent to the opposite channel from the source signal (echo of the left channel is heard on the right) or subsequent echoes can ping pong between channels. A modulation section allows tweaking the delayed sound with a dynamic combination of depth and speed all on a single control with realistically usable settings through its entire range. Throw in the independent output controls and an adaptive damping and what you end up with a VST delay plugin able to deliver lively and exciting delays for all your mixing needs from home studio to pro studio.
Features:
64-bit internal processing resolution.
Lots of built in presets to get your mix jumpstarted.
Full automation support of all controls for VST compliant hosts (additional extensions for REAPER).
Sample accurate, zero-latency algorithm.
Delays can be routed to the opposite channel or ping pong between channels.
Single knob, adaptive modulation brings life to the delayed signal.
Single knob, adaptive damping gives the delayed signal extra depth.
Delays can be biased to either side for a wider image.
Turns mono tracks into stereo.
Output can be summed to mono for chorus style effects or to check mono compatibility.
Eliminates complex routing required to create stereo delay effects
Works with both mono and stereo input.
Works with 64-bit and 32-bit audio hosts running on 32-bit Windows OS.
Controls:
Delay
* Time 1ms to 3000ms (3 seconds) of delay.
* Feedback 0% to 100% to feed echoes back into the input for multiple repeats.
* Bias -100 to 100 allowing the delay to have a centered image (at zero) or an enhanced stereo image with emphasis on the left (negative settings) or the right (positive settings).
* Cross Off-Half-Full. "Off" functions like a standard delay. "Half" sends echo from the left channel to the right output and echo from the right channel to the left output. "Full" is similar to half but each subsequent echo will ping pong between channels.
Spin 0% to 100% controls the dynamic modulation. "Off" at 0% with higher settings controlling both speed and depth together in a proportion that is always usable in your mix.
Damping 0% to 100% controls the adaptive damping control. "Off" at 0% with higher settings pushing the delays further back in the spatial image.
Output
* Dry -30dB to 0dB controls the amount of dry signal mixed into the output.
* Wet -30dB to 0dB controls the amount of wet signal mixed into the output.
* Mono/Stereo controls the output mode of the plugin.
vescoFX.Cross.Delay.VST.v1.0-ASSiGN
观众反应
