- 第 1 页 -
SAW 出4。2了!
SAW 出4。2了!,可以跟SAC接在一起了，![]()
This update brings the SAC hooks into reality. A fantastic way to link both SAWStudio and SAC on a single [color=blue ! important][color=blue ! important]computer.
Enjoy,
Bob L
SAWStudio Full And Lite Version 4.2
Enhancements
* Added the hooks to SAC. The SAC Link option is activated fromwithin the SAWStudio app and once a connection link between SAWStudioand SAC has been established, you can now pass data in both directionsfor recording and playback with SAWStudio using internal shared memorybuffers that completely bypass the Windows soundcard drivers. SAWStudiowill automatically disconnect from the drivers and use the internalshared buffers to communicate with the outside world through the SACengine.
The menu options are selected from within SAWStudio and show up as follows:
The Activate SAC Linkoption on the SAWStudio Options menu will establish the internalconnection between the two programs. SAC and SAWStudio must both berunning at the time, and when the connection is established, aSAC<–>LINK icon will appear in the left corner of the SAWStudiomain titlebar.
The SAC Link Options option expands out to include these following choices:
The Export Mix Data To SACoption allows you to instantly transfer the main MT track and channelmix data directly to the SAC FOH console. This will also automaticallypreset each SAC console channel input source to point to the associatedSAWStudio MT track. This option allows you to playback the SAWStudio MTtracks in a 1 to 1 configuration through the SAC console. You can thenuse the SAC [color=blue ! important][color=blue ! important]Monitormixers to setup separate performer mixes. SAWStudio will not play audiothrough its own driver devices while the SAC Link is active. You do nothave to make any preference changes in SAWStudio… the buffer settingswill be internally set to relax the SAWStudio [color=blue ! important][color=blue ! important]cpuload and rely on SAC to handle the low latency performance. Theinternal link will adjust for SAWStudio playback buffer size changingand latency causing plugins and deliver a fixed [color=blue ! important][color=blue ! important]data [color=blue ! important]stream to SAC with no changes needed to your edl session in SAWStudio.
The Import Mix Data From SACoption allows you to instantly transfer the SAC FOH console setupdirectly into SAWStudio, including automatically creating a recordtemplate with all channel input assignments preset, ready for a liverecording of the current SAC session. All that is needed after thisoption is activated is to Ctrl-Click the first track’s record button inthe SAWStudio MT to open all record meters for all active SAC channels,already pre-assigned. Once again, SAWStudio completely bypasses thesoundcard drivers and gathers its audio data directly from the SACengine. This allows SAWStudio to perform the MT record operation withvery little added cpu load on the [color=blue ! important][color=blue ! important]system, and also relaxes the buffer settings to essentially coast along quietly in the background while SAC handles the [color=blue ! important][color=blue ! important]low [color=blue ! important]latency monitoring load.
The Input Chan Play Tap At SRCoption selects the SAWStudio tap for sending its track data to SAC.This option sends the data from the SRC position at the top of the chanmodule just after the Mono section. Using this option means you areessentially sending the playback data directly from the [color=blue ! important][color=blue ! important]wav [color=blue ! important]files on each track with no added processing from the SAWStudio virtual console.
The Input Chan Play Tap At PRE-PATCHoption selects the SAWStudio tap for sending its track data to SAC.This option sends the data from just after the PRE-PATCH positionwithin the chan module. This option would allow VST Synths data to bepassed onto SAC and the Pre-Patch position routing options withinSAWStudio will still apply, so some signal processing from SAWStudiomay be part of the signal chain before the data reaches SAC.
The Input Chan Play Tap At PST-FDRoption selects the SAWStudio tap for sending its track data to SAC.This option sends the data from the bottom of the chan module, whichincludes all chan processing and automation. Very useful for showplayback of pre-recorded tracks.
Once the SAC Link is initiated, the SAC input source options willexpand to allow individual SAWStudio Mixer Chan selections instead ofjust the hardware device selections. You will see all SAWStudio labelreferences for each channel in the list. You may select any Input Chanfrom SAWStudio or any Output Chan. Selecting an Output Chan allows youto maintain a complete mix in the SAWStudio environment and only useone stereo input chan in SAC to playback the entire 72 tracks fromSAWStudio. Any Input Chan selection is subject to the above mentionedTap points set in SAWStudio.
Likewise in SAWStudio, the record meter Input Zone will display the SACchannel list with the SAC labels. You may record from any SAC channelwhich will automatically adjust the record meter to mono or stereobased on the SAC source assignment. An added bonus here is that you nowhave the ability to record extra channels in your current SAWStudioversion than is possible with SAWStudio alone. For instance… SAWStudioLite allows up to 24 record meters which are normally connected to the12 possible stereo hardware devices. Normally that [color=blue ! important][color=blue ! important]translatesto 12 stereo tracks or 24 mono tracks or any combination in between.But with SAC’s ability to handle 36 stereo devices, you would now havethe ability to pass on up to 72 signals in any combination ofmono/stereo to the 24 record meters. Therefore, you can now record upto 24 stereo tracks (48 channels worth of data) in Lite as long as youhave that many channels of hardware devices connected to SAC.
* The H/S Hide/Show option has been activated on the Record RemoteTransport. Left-Clicking in this zone will hide (minimize) SAWStudioand leave the transport visible on top of whatever is underneath. Thiscan be used to control SAWStudio’s recording functions from inside SACfor instance. Clicking the zone again will restore SAWStudio to thescreen.
* The Hide/Show option has also been added to the Control Track view.Right-Clicking in the Control Track Pyramid Options zone will hide(minimize) SAWStudio and leave the Control Track view visible on top ofwhatever is underneath. This can be used to control SAWStudio’splayback functions from inside SAC for instance. Right–Clicking thezone again will restore SAWStudio to the screen.
* Record Retake will now function while RecRdy mode is active.
Bug Fixes
* Fixed the illegal softedge correction routine to trap forregion entries with bad file links. This solves the mysteriousappearance of giant softedges that keep coming back even after theyhave been removed.
* Fixed the ASIO menu text display to properly display the 16 bit integer format.
* Fixed code to handle right-click options in the MultiTrack Label areaeven if the mouse button is held down for a time instead of released ina normal quick click operation.
This update brings the SAC hooks into reality. A fantastic way to link both SAWStudio and SAC on a single [color=blue ! important][color=blue ! important]computer.
Enjoy,
Bob L
SAWStudio Full And Lite Version 4.2
Enhancements
* Added the hooks to SAC. The SAC Link option is activated fromwithin the SAWStudio app and once a connection link between SAWStudioand SAC has been established, you can now pass data in both directionsfor recording and playback with SAWStudio using internal shared memorybuffers that completely bypass the Windows soundcard drivers. SAWStudiowill automatically disconnect from the drivers and use the internalshared buffers to communicate with the outside world through the SACengine.
The menu options are selected from within SAWStudio and show up as follows:
The Activate SAC Linkoption on the SAWStudio Options menu will establish the internalconnection between the two programs. SAC and SAWStudio must both berunning at the time, and when the connection is established, aSAC<–>LINK icon will appear in the left corner of the SAWStudiomain titlebar.
The SAC Link Options option expands out to include these following choices:
The Export Mix Data To SACoption allows you to instantly transfer the main MT track and channelmix data directly to the SAC FOH console. This will also automaticallypreset each SAC console channel input source to point to the associatedSAWStudio MT track. This option allows you to playback the SAWStudio MTtracks in a 1 to 1 configuration through the SAC console. You can thenuse the SAC [color=blue ! important][color=blue ! important]Monitormixers to setup separate performer mixes. SAWStudio will not play audiothrough its own driver devices while the SAC Link is active. You do nothave to make any preference changes in SAWStudio… the buffer settingswill be internally set to relax the SAWStudio [color=blue ! important][color=blue ! important]cpuload and rely on SAC to handle the low latency performance. Theinternal link will adjust for SAWStudio playback buffer size changingand latency causing plugins and deliver a fixed [color=blue ! important][color=blue ! important]data [color=blue ! important]stream to SAC with no changes needed to your edl session in SAWStudio.
The Import Mix Data From SACoption allows you to instantly transfer the SAC FOH console setupdirectly into SAWStudio, including automatically creating a recordtemplate with all channel input assignments preset, ready for a liverecording of the current SAC session. All that is needed after thisoption is activated is to Ctrl-Click the first track’s record button inthe SAWStudio MT to open all record meters for all active SAC channels,already pre-assigned. Once again, SAWStudio completely bypasses thesoundcard drivers and gathers its audio data directly from the SACengine. This allows SAWStudio to perform the MT record operation withvery little added cpu load on the [color=blue ! important][color=blue ! important]system, and also relaxes the buffer settings to essentially coast along quietly in the background while SAC handles the [color=blue ! important][color=blue ! important]low [color=blue ! important]latency monitoring load.
The Input Chan Play Tap At SRCoption selects the SAWStudio tap for sending its track data to SAC.This option sends the data from the SRC position at the top of the chanmodule just after the Mono section. Using this option means you areessentially sending the playback data directly from the [color=blue ! important][color=blue ! important]wav [color=blue ! important]files on each track with no added processing from the SAWStudio virtual console.
The Input Chan Play Tap At PRE-PATCHoption selects the SAWStudio tap for sending its track data to SAC.This option sends the data from just after the PRE-PATCH positionwithin the chan module. This option would allow VST Synths data to bepassed onto SAC and the Pre-Patch position routing options withinSAWStudio will still apply, so some signal processing from SAWStudiomay be part of the signal chain before the data reaches SAC.
The Input Chan Play Tap At PST-FDRoption selects the SAWStudio tap for sending its track data to SAC.This option sends the data from the bottom of the chan module, whichincludes all chan processing and automation. Very useful for showplayback of pre-recorded tracks.
Once the SAC Link is initiated, the SAC input source options willexpand to allow individual SAWStudio Mixer Chan selections instead ofjust the hardware device selections. You will see all SAWStudio labelreferences for each channel in the list. You may select any Input Chanfrom SAWStudio or any Output Chan. Selecting an Output Chan allows youto maintain a complete mix in the SAWStudio environment and only useone stereo input chan in SAC to playback the entire 72 tracks fromSAWStudio. Any Input Chan selection is subject to the above mentionedTap points set in SAWStudio.
Likewise in SAWStudio, the record meter Input Zone will display the SACchannel list with the SAC labels. You may record from any SAC channelwhich will automatically adjust the record meter to mono or stereobased on the SAC source assignment. An added bonus here is that you nowhave the ability to record extra channels in your current SAWStudioversion than is possible with SAWStudio alone. For instance… SAWStudioLite allows up to 24 record meters which are normally connected to the12 possible stereo hardware devices. Normally that [color=blue ! important][color=blue ! important]translatesto 12 stereo tracks or 24 mono tracks or any combination in between.But with SAC’s ability to handle 36 stereo devices, you would now havethe ability to pass on up to 72 signals in any combination ofmono/stereo to the 24 record meters. Therefore, you can now record upto 24 stereo tracks (48 channels worth of data) in Lite as long as youhave that many channels of hardware devices connected to SAC.
* The H/S Hide/Show option has been activated on the Record RemoteTransport. Left-Clicking in this zone will hide (minimize) SAWStudioand leave the transport visible on top of whatever is underneath. Thiscan be used to control SAWStudio’s recording functions from inside SACfor instance. Clicking the zone again will restore SAWStudio to thescreen.
* The Hide/Show option has also been added to the Control Track view.Right-Clicking in the Control Track Pyramid Options zone will hide(minimize) SAWStudio and leave the Control Track view visible on top ofwhatever is underneath. This can be used to control SAWStudio’splayback functions from inside SAC for instance. Right–Clicking thezone again will restore SAWStudio to the screen.
* Record Retake will now function while RecRdy mode is active.
Bug Fixes
* Fixed the illegal softedge correction routine to trap forregion entries with bad file links. This solves the mysteriousappearance of giant softedges that keep coming back even after theyhave been removed.
* Fixed the ASIO menu text display to properly display the 16 bit integer format.
* Fixed code to handle right-click options in the MultiTrack Label areaeven if the mouse button is held down for a time instead of released ina normal quick click operation.
回复 不是故意的 的帖子
支持多MIDI口了吗？
將會有了, 但不知是不是只支持 BCF......
you need separate sysex files for each Behringer that are preset for a different midi channel... then I have to create a separte template that handles the first 8 channels on one midi channel and the next 8 channels on the next midi channel... and so forth.
I have the sysex files created for up to 4 BCF boxes for SAC... but I still have to create the 16, 24 and 32 channel templates.
I also still have to create the BCF templates for SAWStudio... they are all different.
Bob L