Sawstudio

在SAW里怎么用硬效果器插入比较方便?

混響, 壓縮

..??

这个问题也正想大家可以讨论下。
RNC 就是himhui大哥介绍过那个，小弟已经在用了（前期人声上）。
最近想可以用到后期上，不知道各位有没有经验。

channel1(MT)=>buss=>soundcard output=>hardware=>soundcard input=>channel2(in put)=>mainbus=>soundcard main output

then ,press "SPACE" key.

[ 本帖最后由 margindge 于 08-5-30 23:55 编辑 ]

channel1(MT)=>buss=>soundcard output=>hardware=>soundcard input=>channel2(in put)=>mainbus=>soundcard main output

----这个方法是预料过的,但是不太方便.

主要是压缩,EQ或者一些过带之类的处理.

除了各个轨道上最好BUS也能用上.

SEND挂硬效果器已经看到以前的帖子了,方法不错!

TC 有个插件不错，可当VST插入，然后在插件中分配端口。

是哪个？

integrator

谢谢!~~~

去看看........

啊?

是TC声卡上的啊!!!???

没有其他的"本地区土著居民"能用的么......

直接去SAW论坛上去看看

"But one must realize saw is the only software that can do hardware inserts with NO incurred latency (yes, nuendo/logic/pt do hardware inserts, but with latency. though nuendo and logic I beleive compensate, this adds to engine latency). this is a very very amazing thing from an industry perspective. Maybe more understandable to prospective customers than most of saw's other amazing features."


I see what you are asking... unfortunately... no... no live inserts within the channel strip... the engine is not currently designed with that in mind.

Something to think about for a way future update when the next engine evolution arrives...

Bob L


No delay in SAWStudio... the engine is is a split design when routing through the aux sends and returns as I described... the aux data goes out ahead of the MultiTrack data so the return signal can then be automatically resynced... live in realtime... try it... use large buffers and watch the Aux Master meters... you will notice that they are ahead of the the regular channel meters... the result is no delay or latency between the straight and processed signal through the external devices.

This was one of the first design elements perfected in the SAWStudio engine... long before the ability to do small buffer sizes was possible.

Bob L

好似插入延迟不易解决......发送没有问题.

如果要像軟件般的形式在通道插入硬件，　ＳＡＷ暫時還沒有這設計，　但ＳＡＷ　是現時唯一的軟件在使用外部硬件時不會對引擎加添延遲，　在音頻工業可說是值得驕傲。