Sawstudio

有人成功过吗？我已开始采集就自动退出！！郁闷。。。
这个功能挺牛B的。。。为做音视频的人提供了极大的便利！可惜...

我可以

就是用DV通过火线卡采集到电脑吗！

DV 應該沒問題, ANALOG device 我也試過退出，不知道跟　我的　ｕｓｂ　ｃａｐｔｕｒｅ　盒有沒關係．．在　ＶＥＧＡＳ　也不行．．．．．．

[ 本帖最后由 himhui 于 08-3-21 23:52 编辑 ]

我的内置摄像头可以捕捉，火线没试过。

SAWSTUDIO通过内置摄像头可以捕捉视频？

我是analog device...用的是品尼高的全能王，dv设备没有试，因为没有DV。会不会和硬件的兼容性有关系？SAW是不是有指定的硬件才能使用？品尼高的在电脑的硬件设备里有AVDV的驱动，SAW本身也能认得出我的卡，但preview就可以，一点播放健开始采集就自动退出...贼郁闷......

我载入H.264(mp4)也是直接退出....，本来很期待的新功能，却发现用不了 ，郁闷挖

The AV Link box generally works very well for me... is this a firewire version or usb?

If it is firewire... make sure you have doen the firewire patch if you are using XP Service Pack 2... it breaks the firewire... details can be found in a Google search or on the RME forum.

If it is usb... perhaps your usb is not up to usb 2.0 speed, which you will need to capture video.

SAWStudio will only work correctly with the firewire capture.

Bob L
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－


Okay nevermind... I read the Saw manual again and understood it better this time. I was not using the right mode. When I changed it, things changed. It is working great now. I am soo happy! Thanks Bob!
__________________
Thanks a million!

David

哎，那就没办法咯...如果只能用火线或者usb 1.1，那我不如用vegas!!!?

Bruce, SAWStudio is designed to only capture video as a DV file direct from a Firewire input. It also allows video only capture from some usb camera inputs... but there is no provision for audio sync in that mode.

You can use a DV camera as a DV converter in many cases, or you would have to buy a DV converter box to accept anaolg composite or S-Video inputs and change them to firewire.

The firewire DV capture gives you perfect audio video sync and allows for a very clean way to bring video into SS.

Otherwise... capture using the video card software and then open the file into the video viewer after it is captured.

Bob L

[ 本帖最后由 himhui 于 08-3-22 14:29 编辑 ]

谁说只能用火线和usb1.1？

UISB 必要 2.0

....

看错了，只能用火线和usb2.0！！！bob叔叔写的！SAWStudio will only work correctly with the firewire capture. perhaps your usb is not up to usb 2.0 speed

但它也有 analog device 的選項, 應該是給pci capture 卡 使用

...