这是说明书上关于Stereo Image Link的说明：
Stereo Operation
Stereo operation requires only two things, - 1) Two short stereo (TRS) 1/4" phone cables are plugged
from Stereo Link input of one unit to Link output of second unit and vice versa, and that 2) the unit has
the Link function selected on the front (the RED "Link "LED in the detector mode should be on), or the
Stereo Image Link Switch is on if provided on the unit (EL8-X). It is usually best to match all front
panel settings on the two "left and right" units to maintain imaging. However, unlike most units, the user
has the option to treat the left and right channels differently.
An example of this may be when one channel has a heavy low frequency source (such as a tom drum)
that is causing both sides to pump. You could put the side without the L.F. source into DET HP mode
to prevent that side from excessively modulating, allowing you to set the release a little faster on the
side with the boomy tom. Sometimes for room mics, keeping the units unlinked actually makes them
sound more stereo. This is due to unique left and right ambient envelopes widening the stereo image.
See “Stereo Image Link Mod” on page 13 for a method of linking two EL8-X’s to prevent image shifting