安装了PRO TOOL LE6。7（手动破解版）很好用，下载地址
http://www.9iv.com/down/soft/1934.htm?eid=167550 PRO TOOL 6.7
破解方法
终于可以不用买正版拉。。。。。
pro tools le 6.7 破解方法。。。可以用在maudio卡上。。。。
Here we go, full instruction XP(SP2) installation and crack:
1) Get ProTools 6.7 LE or TDM with valid serial number (which can be found all over the net)
2) Make sure you have installed supported M-audio card with latest driver (list of them is here:
http://www.m-audio.com/products/en_us/ProToolsMPowered-main.html), and your computer meets min requirement for PT (
http://www.digidesign.com/compato/)
3) Install PT LE 6.7 (do not install any DIGI hardware drivers)
4) Reboot
5) Extract files and overwrite them from "step 8.rar" to C:\Program Files\Digidesign\Pro Tools\
6) Open ProToolsLE.exe (or TDM whichever you installed)
7) Enter serial number then close protools
Extract files from "step 11.rar" to C:\Program Files\Digidesign\Pro Tools\
翻译
1）装有效的正版ProTools 6.7 LE or TDM，带有序列号
2）装上M-audio card得driver驱动
http://www.m-audio.com/products/en_us/ProToolsMPowered-main.html,你的电脑将为pt设置最小得要求，看
http://www.digidesign.com/compato
3)安装PT LE 6.7 但不要安装digi硬件驱动
4）从起
5）从step 8.rar解开文件覆盖到C:\Program Files\Digidesign\Pro Tools\
6）打开ProToolsLE.exe或TDM。exe
7）输入序列号然后关闭protools
8）从"step 11.rar解开文件覆盖到C:\Program Files\Digidesign\Pro Tools\
我也是装了好多次 才成功，
先安装 tpkd 下载地址
http://broadband.paceap.com/extensions/tpkd.zip
安装时注意不能装下面3项：
Digidesign Driver（不点开PRO TOOL 安装 时选项是看不到的）
ASIO Driver
Wave Driver
安装时这3个都找到不安装，我前面装时就取掉了ASIO Driver ，Wave Driver 驱动Digidesign Driver看不到，最后才发现点开PRO TOOL 有 Digidesign Driver项
其他步骤大家应该都知道了。
我装了很好用。
S/N: DIGI0670 87260064 2d25b5b5
S/N: DIGI0670 87260064 2d25b5b4