D&B 出新系统了 哈哈 比Q 大点 比J 小点
V-Series
The d&b V-Series with its remarkable clarity as well as extraordinary dynamic bandwidth, impressive power capability and headroom make it not only a highly efficient and flexible stand-alone system ranging from small to large configurations, but having the same driver arrangement and horizontal dispersion it is the veritable complement to the J-Series. The V-Series consists of the V8 and V12 loudspeakers and the actively driven high performance cardioid V subwoofer, which are all matched and constructed to be mechanically compatible both in flown or ground stacked arrays. All the components needed to suspend the loudspeakers within the three-point V-Series flying system are integrated into the cabinets, ensuring speedy deployment, providing a quick and easily configurable line array. The matching sound characteristics of the V-Series with the J-Series once again flaunts the potential of the d&b System reality.
V8 loudspeakers
![]()
The V8 is a 3-way passive design housing 2 × 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated wave-shaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 80° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V8 loudspeakers or combined with V12s and / or with V-SUBs. The V8 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle while two additional recessed grips are provided at the rear bottom of the cabinet.
Amplifiers
The V8 can only be driven by the d&b D12 dual channel amplifier configured for the V8. More detailed information on specific loudspeaker setups with the D12 amplifier is available either in the relevant loudspeaker or D12 manual.
Data
The d&b V-Series with its remarkable clarity as well as extraordinary dynamic bandwidth, impressive power capability and headroom make it not only a highly efficient and flexible stand-alone system ranging from small to large configurations, but having the same driver arrangement and horizontal dispersion it is the veritable complement to the J-Series. The V-Series consists of the V8 and V12 loudspeakers and the actively driven high performance cardioid V subwoofer, which are all matched and constructed to be mechanically compatible both in flown or ground stacked arrays. All the components needed to suspend the loudspeakers within the three-point V-Series flying system are integrated into the cabinets, ensuring speedy deployment, providing a quick and easily configurable line array. The matching sound characteristics of the V-Series with the J-Series once again flaunts the potential of the d&b System reality.
V8 loudspeakers
Amplifiers
The V8 can only be driven by the d&b D12 dual channel amplifier configured for the V8. More detailed information on specific loudspeaker setups with the D12 amplifier is available either in the relevant loudspeaker or D12 manual.
Data
| Components | 2 × 10" / 1 × 8" / 2 × 1.4" |
| Max. Sound pressure (1m, free field) with D12 | 139 dB SPL |
| Power handling capacity LF (RMS/peak 10ms) | 500 / 1200 W |
| Frequency response (-5 dB) | 67 / 100 Hz - 18 kHz |
| Nominal dispersion angle (horizontal) | 80° |
| Cabinets per channel D12 | 2 |
| Dimensions (W × H × D) | 310 × 700 × 460mm |
| Weight lb | 34kg |
