额外支持4段均衡,支持附加音箱模式,未来版本支持AmpStudio，承诺不断升级
详情见下：
http://mywebpages.comcast.net/matt_hughes/podxtended.htm
好不容易找到的。
要是有guitarport的破解就好了，guitarport摇身一变成podxt了。
注意：
1、看清步骤再省级
2、弄坏了自己负责啊
*******************
PODxtended Firmware Updates
Latest version: v1.02.01b (first release!)
Features: 4-band Post EQ, support for additional amp models, initial support for AmpStudio (to be released)
Known issues: Post EQ only works in Direct/PA mode. The page indicator slider does not display correctly on the extra pages.
DISCLAIMER:
USE OF THIS UPDATE IS COMPLETELY AT YOUR OWN RISK!!! I am not responsible for any damage that occurs to your POD or your computer.
I am not in any way affiliated with Line6. Please do not ask them for support for anything related to this update.
I am offering this update as shareware. If you find that it is useful to you, please consider making a donation to support future updates with cool new features (and to support all the hard work I did!). A suggested amount would be $20 US.
Instructions:
1. Download these files:
a. XTPatch and PODxtended patch file
b. From the Line6 site: 'PODxt Firmware 1.02.zip' and 'XTU.zip' (at the bottom of this page)
2. Extract all the above files to some directory
3. Run XTPatch.exe, select 'PODxt Firmware 1.02.bin' as the original image and 'pxtended1_02_01b.bin' as the patch file. Click 'Do It!'
4. Run XTU.exe and select the newly created file 'fw_patched.bin'. You can leave 'Keep existing patches' checked if you want. Make sure your PODxt is properly connected to your computer via a 2-way MIDI cable, then click 'Start'
5. Wait....
6. Reboot your PODxt
If everything goes well you should have a nice shiny new version screen and some cool new features!
The Post EQ controls can be accessed in edit mode by scrolling past the bottom page (fx tweak/tempo)
The gain control labels are in percent, not dB: 0% is cut, 50% is 0dB gain, and 100% is boost.
..oh yeah,